Skip to main content

Acustica Audio Green Equalizer - GML (George Massenburg Labs) EQ clone

By
(ENG) The Green Equalizer is inspired by a reference standard parametric equalizer, characterized by astonishing precision and sonic accuracy when sculpting the response of any source. Green Eq offers overlapping frequency bands, which provide great precision and flexibility, a complete control over a wide frequency range and “Q” setting, along with 15 dB of cut or boost on five individual bands. The Low and High bands offer counter-clockwise detents for shelving curves in addition to the variable “Q” values from 0.4 to 4 found in the other three bands.
In this screenshot in AVID Pro Tools 11 (AAX64 64bit plug-in format) via the Blue Cat Audio Patchwork wrapper plug-in.




(IT) Il Green Equalizer è il clone di uno dei più amati equalizzatori della GML, il modello 8200, la sua eccellenza non ha bisogno di presentazioni, è narrata dalla storia della musica internazionale.
Nella schermata si può ammirare il Green EQ aperto su AVID Pro Tools 11 (compatibile solo con plug-in a 64bit AAX64) tramite il plug-in wrapper Blue Cat Audio Patchwork. Il suono di questo plug-in è bellissimo, estremamente musicale, qualsiasi cosa tocchi inevitabilmente la migliora. Un must!

 Links:

 http://www.acustica-audio.com
http://www.bluecataudio.com
http://www.massenburg.com
http://www.avid.com

Labels

Labels:

Comments

vstcomplex said…
I am very impressed with your post because this post is very beneficial for me and provide a new knowledge to me

Boz Digital Labs Sasquatch Crack
July 26, 2021 at 9:52 AM
Post a Comment

Popular posts from this blog

UAD Little Labs® Voice Of God - & - BOZ Digital Labs Bark of Dog (Bass Resonance Filters)

By
UAD - Little Labs® Voice Of God Bass Resonance Plug-In  A One-of-a-Kind “Magnifying Glass” for Low Frequencies — Emulated to Perfection for the UAD-2 Platform. Little Labs authenticated, UA-modeled bass resonance tool for drums, bass, vocals and more. Adds heft and precision to low-end source material — far beyond a simple EQ Easy two-knob operation for dialing in the target frequency and effect amount (amplitude) Two buttons dictate the center of the sweepable frequency range, 40 or 100 Hz, while pressing both buttons sets the center to 200 Hz. Dedicated “Flat” button allows for quick A/B comparison Requires a UAD-2 DSP Accelerator Card or Apollo Interface. http://www.uaudio.com BOZ Digital Labs - Bark Of Dog Bass Resonance Filter Bark of Dog is a bass resonance filter that lets you increase your low end without turning up the flab. I like to think of it as a way to boost the low end while still keeping it under control. While the controls are super simple, the effect ...
2 comments
Read more

Sonnox Oxford Plugins also as 64 bit versions available

By
Sonnox Native 64-bit Support : Frequently Asked Questions 9th December 2011
3 comments
Read more

Maselec EQ plug-in version by Acustica-Audio

By
Maselec EQ, excellent plug-in version by Acustica-Audio: Ivory IAE-2 OPERATION - Input & Output knobs control plug-in input and output gain. - The PRE-IN button enables (lamp ON) or bypasses (lamp OFF) the preamp stage of Ivory Eq. - BYPASS button sets to bypass the plug-in (lamp ON) ) or not-bypasses (lamp OFF) - Input Trim:  This knob sets the input level from -24dB to +24dB, and is used to control the signal level inside the eq, the output level is than automatically compensated by the same amount of gain. At the first execution of the plug-in, input is set to ensure that you feed an appropriate level from the first stage of your signal path to the final one. - INPUT – OUTPUT VU METER measure the input (upper meter) and output (lower meter) levels of the plug-in. Each band is controlled independently by an identical set of controls; sections are Low Frequency 1, Low Frequency 2, High Frequency 1 and High Frequency 2, each section has controls for: - Q - Freq...
5 comments
Read more