Skip to main content

UAD Little Labs® Voice Of God - & - BOZ Digital Labs Bark of Dog (Bass Resonance Filters)

UAD - Little Labs® Voice Of God Bass Resonance Plug-In 

A One-of-a-Kind “Magnifying Glass” for Low Frequencies — Emulated to Perfection for the UAD-2 Platform. Little Labs authenticated, UA-modeled bass resonance tool for drums, bass, vocals and more. Adds heft and precision to low-end source material — far beyond a simple EQ
Easy two-knob operation for dialing in the target frequency and effect amount (amplitude)
Two buttons dictate the center of the sweepable frequency range, 40 or 100 Hz, while pressing both buttons sets the center to 200 Hz. Dedicated “Flat” button allows for quick A/B comparison
Requires a UAD-2 DSP Accelerator Card or Apollo Interface.

http://www.uaudio.com


BOZ Digital Labs - Bark Of Dog Bass Resonance Filter

Bark of Dog is a bass resonance filter that lets you increase your low end without turning up the flab. I like to think of it as a way to boost the low end while still keeping it under control. While the controls are super simple, the effect that this has on controlling the low end in a mix is pretty exciting.

Available Formats:
Win (32 and 64 bit): VST, VST3, RTAS, AAX Native
Mac (32 and 64 bit): VST, VST3, RTAS, AU, AAX Native





Entrambi eccellenti, Voice Of God ha un suono più preciso e a fuoco rispetto al Bark Of Dogs che però è totalmente gratuito, i controlli dello UAD sono accuratissimi e permette delle correzioni più misurate, gira solo sui potentissimi DSP delle schede proprietarie della Universal Audio, quindi non ha peso sulla CPU del vostro computer, il BOZ è un po' più approssimativo ma si parla di finezze, in quanto plug-in nativo è totalmente a carico della CPU ma è comunque estremamente leggero.

Comments

Popular posts from this blog

Sonnox Oxford Plugins also as 64 bit versions available

Sonnox Native 64-bit Support : Frequently Asked Questions 9th December 2011

Maselec EQ plug-in version by Acustica-Audio

Maselec EQ, excellent plug-in version by Acustica-Audio: Ivory IAE-2 OPERATION - Input & Output knobs control plug-in input and output gain. - The PRE-IN button enables (lamp ON) or bypasses (lamp OFF) the preamp stage of Ivory Eq. - BYPASS button sets to bypass the plug-in (lamp ON) ) or not-bypasses (lamp OFF) - Input Trim:  This knob sets the input level from -24dB to +24dB, and is used to control the signal level inside the eq, the output level is than automatically compensated by the same amount of gain. At the first execution of the plug-in, input is set to ensure that you feed an appropriate level from the first stage of your signal path to the final one. - INPUT – OUTPUT VU METER measure the input (upper meter) and output (lower meter) levels of the plug-in. Each band is controlled independently by an identical set of controls; sections are Low Frequency 1, Low Frequency 2, High Frequency 1 and High Frequency 2, each section has controls for: - Q - Freq...